Invitation
The 9th China (Beijing) International Power Transmission and Automatic Control (PTAC2008) Fair
China International Exhibition Center in Beijing, 10-13, June, 2008
PTAC CHINA is authorized by The Ministry of Science and Technology of the People’s Republic of China. Only obtain Machinery industry authorized organization—China Machinery Industry Federation support to be the largest professional exhibition in northern of China in this field, the ninth edition PTAC2008 will be held and concurrent with (FA/PA) In Beijing China International Exhibition Center on 10th-13th, June, 2008, total area covers 30000 Sqm.
PTAC CHINA is CCPIT-Machinery Sub-Council widely promotion a international brand exhibition. PTAC CHINA satisfy the demand for construction equipment、Auto、machine tools in northern region as well as satisfy the demand of most of enterprises/institutions. PTAC CHINA will base on China northern market, face to domestic customer, according on development of industry trend, strive for supplying a platform to exhibit product, technology and exploit trade market.
PTAC CHINA 2008 will be held biennially, PTAC 2006 has gained support from international and domestic well-known enterprises. KOCEMA organized almost 70 Korea enterprises went to participate PTAC 2006.Taiwan Fluid Association organized around 20 enterprises went to exhibit, domestic reached near 200 companies, professional attendee near 10,000. Exhibit area reached 13,000 Sqm.
PTAC2008 will be hold concurrent with（FA/PA）on 10th—13th June ,2008 in Beijing China International Exhibition Center, total area is 30000 Sqm. Both of them exhibit content relate each other, share with attendee. The condition of exhibition as below:
Sponsors:
China Council For The Promotion of International Trade (CCPIT)
Machinery Sub-Council (MSC)
Organizers:
CCPIT Machinery Sub-Council
China National Machine Components Corporation
Co-Organizers:
Beijing Asia Machinery Inter-Expo
Profile of Exhibits:
Fluid power transmission
1. Hydraulics: Pump, Motor, Drive device, Cylinder, Valve, Pressure switch, Connection, Complete system, Test rigs, Training and instructional apparatus, Water hydraulic transmission
2. Pneumatics: Cylinders, Pressure intensifiers and air oil actuators, Motor, Working unit, Valve, Complete pneumatic control component and system, Connection, Miscellaneous apparatus
3. Hydrodynamics: Hydrodynamics device, Fluid converter, Hydro viscous variable speed driver unit
4. Seals: Rubber seal, Mechanic seal, Flexible graphite seal, Other filler seal and sealing materials, Seal test rigs and measuring instrument, Special seals production equipment
5. Hydro-machine: valves, pump, ventilation machine, electric appliances, and other technical equipments, equipment and technical testing.
Mechanical power transmission
1. Mechanical transmission unit for stationary arrangement
2. Mechanical transmission for mobile machines
3. Speed change gear unit
4. Speed variation device
5. Hydraulic gear reducer
6. Plain bearing
7. Ball bearing
8. Roller bearing
9. Miniature bearing
10. Coupling and clutches
11. Brake and brake system
12. Belt and chain drive
13. Other transmission device
14. Transmission test equipment
Electrical power transmission
1. Normal type industrial motor
2. Special type industrial motor
3. Servomotor
4. Component for electrical drive technology
Power generating sets
1. Power Solutions and Equipment: Diesel engines, Gasoline engines and Electric engines, Motors, Water turbine, Wind Power, Nuclear power, Solar and Hydropower Solutions and Equipment
2. Generating Sets: Diesel generating sets, Marine generating sets, Gas generating sets, Mobile power stations, Unmanned power stations, Generators
3. Spare parts and Accessories like Fuel system equipment, Cooling system equipment, Intake and exhaust system equipment, Lubrication system equipment, Genset Controller, Control system, Remote control, Pump, Cylinder, Igniter, Valves, Voltage Regulators, Switches, High voltage Coil, Starter motor, Filter, etc
4. Equipment for Repairs, Measuring instruments, Specialized Tool, Design Software
Compressed air technology
1. Compressed air producing device
2. Compressed air treatment device
3. Compressor accessories
4. Accumulators
Automatic control technology
1. Component and system for controlling
2. Automatic control software
3. Date treatment system
4. Inverter
5. Sensor
6. Converter
7. Internet technology
8. Electronic communication technology
9. Component for internet connection
10. Mechanical-electronic device
Environmental protection instrumentation, water resources use equipment, valve and so on
Booth Fee:
Foreign-owned enterprises:
Cost of Participating:
? Standard Shell Scheme Booth (3x3=9 square meter): 2600US$ /Booth
Indoor Raw Space: 240US$/Square meter (Minimum 36 square meters)
A Standard Shell Scheme Booth includes:
Fascia board with exhibitor’s English name
Panel walls on all closed sides of the stand
Booth area fully carpeted
One information counter, two folding chairs, one wastepaper basket, one 220v socket and two spotlight.
In addition, two sides opened booth add 10% booth fee, three sides opened add 20%, island booth add 30%.
Organize visitor:
PTAC 2008 is the improvement of the PTAC 2006, prior of Beijing Olympic 2008,correspond the topic of development north-eastern industry base, will organize industry of metallurgy、mining、construction equipment、plastic machinery、machinery tools、 auto、 agriculture machinery which coming from Beijing、Shenyang、Tianjin、Xi’An、Chongqing and so on for business visit. Meanwhile CCPIT-MSC will fully use his years of foreign exchanging network to organize international professional visitor.
Application:
Every enterprise intends to attend the exposition, please earnestly fill in Application form (attachment), after stamping unit official seal, as soon as possible facsimile to organizer. The organizer successively in turn will assign the stall according to first come first serve, and the facsimile layout, the sending participation confirmation letter and "Participation Handbook" (including exhibition date, exhibit transport and arranging represents recruit so on).
You can check-in on line through our website www.ptacchina.com.cn
Application date up to 2008-3-28
Exhibitor who pays the booth fee before 31.December.2007 will get 10% discount of booth fee.
Request: The participation product which request having the proprietary intellectual property rights product, or permitted after the intellectual property rights person’s authorization, non-abuse of authority. If has the right infringement dispute in the display process, according to national policy processing. Is the right infringement firmly, immediately will request the exhibit article to withdraw.
Exhibit article will be displayed by material object primarily, auxiliary by model, picture, film and television.
Payment：
? The enterprise which confirmed by the organizer unit should remit the 50% of total cost before 31, December 2007. The rest of total cost should be paid before 30, Mar. 2008.
? Contact with us:
? CCPIT Machinery Sub-Council
Add: No.46 Sanlihe Road, Xichengqu, Beijing,
Postal Code: 100823
Tel: (0086 10) 68595067 , 68595043
Fax: (0086 10) 68572287
Contact person: Mrs. Yu Hongli. Mrs. Cao shanshan
Http://www.ptacchina.com.cn
E-mail: ptac@ccpitmsc.org |
